In the beginning, sorry for small delay. I've finished this project 4 weeks ago, but somehow it always missed schedule. Anyhow, depron airboat with 3D printed propulsion elements is ready!
Next week passed and Depron Airboat is almost ready. Almost, since it still needs some finishing and I'm missing a BEC. Turned out that total power usage of one 9g servo and FrSky X4R receiver is slightly too high to just use single LM7805. 350mA during servo movement means more that 2W of heat (
(12-5) * 0.35) over single LM7805. Too much, so I will have to scavenge old models for still functional step-down converter.
Hull made from 6mm Depron is now glued together using Uhu Por and polyurethane wood glue. It measures 18x8x2 inches. I've put my 3D Printed propulsion and steering system on it and did first static test.
It works. First water tests next week.
One of my first DIY RC projects was a Depron Airboat I've build almost exactly 2 years ago. 12x6x2 inch hull, motor, servo, rudder and ESC. And honestly, I loved it. It was a great fun playing with it. Too bad, it did not survived very long. It broke in a middle of a lake and I decided my live is worth more. All I have left is a video
This season I started to build another Depron airboat. Slightly bigger, heavier and with more power. And partially 3D printed. Hull will be made from Depron, but propulsion and steering system will be (is) printable.
After few hours of printing time, propulsion and steering is done. What is left is to make a hull. 18x8x2 inches made from 6mm Depron. I might cover bottom with glass fiber and impregnate with polyurethane wood glue diluted with alcohol.
New thing will be a reversible ESC. I've already configured and tested FVT Littlebee 20A to act as reversible ESC and it seem to be working like expected. I only wonder how effective rudder will be when on reverse. Not much I effective probably…
And yes, STL files will be available when this is proven to be working. Everything for the community 🙂