Entry level DLG (Discus Launch Glider) from HobbyKing has a quite important flaw for a "entry" level model: it is not durable. As a matter of fact, it is quite fragile, specially where plastic nose section is attached to composite fuselage tube. It is attached only with 3 small screws, and I can guarantee: every harder landing will result with something broken. During 3 first weekends with my Mini DLG Pro, I had to glue it back together every second flying session.

Those 3 screws are just not stron enough to keep everything together, so I've decided to fix it with epoxy glue and I suggest all new owners of this DLG do it at the beginning. Thin layer of epoxy put everywhere where plastic meets fuselage tube is enough. It make glider strong like it should be from the beginning.

hobbyking dlg pro 990mm epoxy reinforcement 2

hobbyking dlg pro 990mm epoxy reinforcement

There is a penalty of course: nose section no longer can be detached. Since HobbyKing does not sell replacement parts for this model, this is not a big problem after all...