DIY brushless motor kit…

China is such a magical place… among all those affordable things you can buy there, there are those not so useful, but still affordable things that, for sure, you do not need. Just like DIY Assemble 2204 2-3S Brushless Motor 0.42*2.8 Copper Wire with Motor Cap Banana Plug.

DIY Assemble 2204 2-3S Brushless Motor 0.42*2.8 Copper Wire with Motor Cap Banana Plug

As you can see on a picture above, it is a motor that you have to assemble by yourself. Wind the coils, install bearings, learn the difference between Delta and Star configuration, and so on and so on… Oh, and there is absolutely no manual. So even number of wire turns is a mystery. I suspect something around 10, but who knows.

Tomorrow will be the first attempt to assemble it. I hope magic smoke will not appear…

7 thoughts on “DIY brushless motor kit…

  1. If you need assistance or an advice I can give it. Also I have a suggestion how to know number of turns if you have a tachometer

    1. Had and extra hour, so gave it a try. Failed of course 🙂 4 coils burned, probably short circut between coils. tried 10 turns, barely fited. New wire on the way, will try 9 turns

    1. OK, DieHertz, there are many diagrams for wiring, and they differ between each other greatly in term of order.
      Do you know a correct 12N14P for Delta?

Leave a Reply

Your email address will not be published.