Next week passed and Depron Airboat is almost ready. Almost, since it still needs some finishing and I'm missing a BEC. Turned out that total power usage of one 9g servo and FrSky X4R receiver is slightly too high to just use single LM7805. 350mA during servo movement means more that 2W of heat ((12-5) * 0.35) over single LM7805. Too much, so I will have to scavenge old models for still functional step-down converter.

airboat depron hull parts

Hull made from 6mm Depron is now glued together using Uhu Por and polyurethane wood glue. It measures 18x8x2 inches. I've put my 3D Printed propulsion and steering system on it and did first static test.

It works. First water tests next week.